Relatively recently on the market appeared new from Japanese developers – the liquid glass. Advanced motorists are able to evaluate the product and experience the "wow effect" in his car. Today let us examine: what is liquid glass for cars, what are the advantages and disadvantages of the tools, how to apply liquid glass and is subsequently removed.
Liquid glass for cars are used as polishes. When processing the body or just auto creates a transparent film that protects the car from minor damage, adds Shine and novelty. As noted by the owners of the cars, color after polishing becomes brighter. Besides the effect of restoring color and hide small defects, liquid glass repels water and air.
Liquid glass is of several types:
The last is the most rare, is used as a thermostat. Most often used for polishing kalium, because the polishes on the basis of potassium have better water-repellent properties.
The advantage of using liquid glass Polish over conventional lies in the comparative durability, hydrophobicity, keeping the original color and hide small defects. For comparison, the wax Polish is kept on the car to 1 car wash, polymer to 4-5, the abrasive is used in rare cases (as an example, to remove the glass). Glass will stay on the car up to 30 washes.
Nanoceramics and liquid glass – primary competitors on the market of automotive services. Nanoceramics is the material expensive, but at the same time more durable. If liquid glass in the domestic climate lasts for 8 months (max a year), producers nanoceramics promise result up to 3 years. In the choice between conventional Polish, ceramics and glass, preference should be given to the latter. Liquid glass is a confident middle between expensive ceramics and conventional coatings. Whatever You decide, the choice is yours.
Despite all the advantages of the procedure, there are some drawbacks. Among them:
So, You have weighed the pros and cons of liquid glass for car. Warn you again, coating machine liquid glass is a difficult procedure. In the case of small errors the result can be disastrous. If you believe You possess the skills for independent study of auto – forward!
The premises for processing must be clean. No drafts, high humidity. The ideal temperature of 10-40 degrees. Fresh air processing machine, alas, will not work. The winter cold and the direct sun's ultraviolet rays in summer can have a negative impact on the result.
Before you start the treatment of auto liquid glass, you need to buy the following materials:
Tip: often in stores liquid glass is sold with some of the items listed above. Better not skimp and get a tool which includes the necessary components for processing.
Before applying the composition on the car, save your car from all the dirt. If you have old Polish remove it. Then dry and remove the grease from the car.
Before polishing, we recommend to read video how to apply liquid glass on the car. A clear process will be more clear, and some points at any time to re-read the instructions below.
Look in the purchased polishes the user manual in the Russian language. If there is one, suggest it be read carefully before any action. Also note that the full polishing of the car is +/- 5 hours. All because every detail of the body is processed separately and in several layers.
So, how to cover the auto with liquid glass:
Follow the procedure with each part of the machine. After all the manipulations, leave the car for 5-6 hours to dry. After successfully polishing do not wash the car within 1-2 weeks.
The motorist is to wash the composition from the vehicle, in case of bad polishing. If the procedure was successful and without flaws, it is necessary to remove the liquid glass is not.
On the site of one of the manufacturers of liquid glass write that:
"Liquid glass can be removed with a polishing with fine abrasive."
That is, to remove liquid glass from the car body, it is sufficient to Polish it with abrasive. How to write the drivers, this method is not a panacea. The abrasive will not be able to remove the composition from the deep scratches. Plus, he wears out quickly and needs a lot of water in the process.
In case of unsuccessful processing machine with liquid glass, remove it from the vehicle will only partially. So consider whether or not the risk of the money saved?